|
System Control Module
- Xerox FreeFlow Document Services Platform (DocuSP)
- Sun Blade(tm) 2500
- CD-RW / DVD-ROM Drive
- Colour flat panel display
- Keyboard and mouse
- Ethernet interface (10/100 BaseT)
- Three Universal (PDCIMUB) printer interface cards
- Controller stand
- Options:
- 36-track tape drive (Available post-launch)
- Online card
- QIC tape
Printer Module
- Xerographic engine with laser raster imaging system for black and Light Emitting Diode for colour
- Prints simplex or duplex
- Monthly duty cycle: up to 6 million impressions
- Black plus one highlight colour
- Permanent housing for black dry ink, plus one customer changeable unit (CCU) for colour dry ink
- Operator attention light
Datastream Support
- PCL, PPML, VIPP, Adobe PostScript(r) Level 3, PDF, HP PCL6, TIFF, RDO, ASCII
- Integrated FreeFlow Variable Information Suite
- LCDS/Metacode and IPDS optional
Speed
- Print speeds: Up to 128 ppm (A4)
- No throughput speed degradation for highlight colour print
Resolution
- 600 x 2400 dpi for black
- 600 x 600 dpi for colour
Toner
- Black plus blue and red colour toners available; green toner optional
- Black plus one colour for rendering numerous halftones (tints and shades)
Paper Handling
- 60 to 200 gsm cut-sheet paper weights
- 203 by 254 mm to 356 by 432 mm including A4, A3, B4 paper sizes
- 178 by 254 mm enablement kit (optional)
- Label stock, tab stock, carbonless paper, pre-perforated stock, safety stock, and other specialised application materials
Input
- Main tray (tray 1): 1,100-sheet capacity of 80 gsm stock
- Tray 2: 600-sheet capacity of 80 gsm stock
- Two high-capacity feeders (trays 3 and 4): 2,600
- sheets each of 80 gsm stock (standard)
- Up to two additional high-capacity feeders (optional): 2,600 sheets each of 80 gsm stock input trays
Output
- Two high-capacity stackers (standard); up to two additional high-capacity stackers (optional).
- Each 2,500-sheet capacity of 80 gsm stock
- Sample tray: 100 sheets of 80 gsm stock
- Purge tray: 100 sheets of 80 gsm stock
- Bypass transport: enables connection to any DFA-compliant, third-party inline finishing device (optional, available post-launch)
Connectivity
- Ethernet: TCP/IP, Netware, AppleTalk
- Token Ring: TCP/IP, Netware, AppleTalk
- LCDS: IBM Channel, Ethernet TCP/IP, 36 track tape - optional (3490 Format)
- FreeFlow Makeready, FreeFlow Process Manager
- FreeFlow Web Services, FreeFlow Print Manager
- LCDS/Metacode and IPDS optional
Environmental Requirements
- Recommended operating temperature: 22° ±2°C
- Minimum/maximum operating temperature: 10° to 29°C
- Minimum/maximum relative humidity: 45% ± 10% (no condensation)
- Maximum normal altitude: up to 1830 m above sea level
- Audible noise level: meets 82dB noise exposure limit
- Heat dissipation, in Btu per hour
- System control module: 3,074 Btu
- Printer module: 4,454 standby; 32,770 operating
Electrical Requirements
- System control module: 100-240 VAC, 47-63 Hz, 10 amp
- Printer Cord System:
- 50Hz Service
- 32 amp dedicated service (Wye): 220/380 VAC or 230/400 VAC or 240/415 VAC (3 Phase)
|
